User's Manual Part 1

RBS 2109 User’s Guide
Engineering
The Engineering process begins when the Site Acquisition and Civil Works
processes are complete.
The Engineering process consists of the following activities:
• Measuring and collecting information about sites
• Designing the antenna and radio configuration, and producing cable
drawings
• Making drawings showing the positions of the antenna and RBS equipment
• Defining areas of responsibility between the purchaser and the contractor
• Producing site-specific information in the Site Installation Documentation.
For more information about the results from the site engineering process, see:
Radio Site Installation
Engineering Manual
EN/LZT 302 069
Installation and Integration
The work involved in this process is performed by installation personnel, and
test and integration personnel.
Installation personnel are responsible for the following activities:
• Installing the antenna system
• Installing the RBS
• Earthing the RBS
• Connecting a power supply to the RBS
• Connecting the antenna system to the RBS
• Installing cable ladders and cable ducts
• Installing battery backup
• Installing PCM cables
The test and integration personnel are responsible for the following activities:
• Performing the tests specified in the contract and integrating the site
• Troubleshooting if tests indicate a fault
7EN/LZT 720 0090 Uen R1A 2004-09-17