User's Manual Part 1

Table Of Contents
RBS 2109 User’s Guide
Technical college or equivalent education with an emphasis on electrical
engineering
Familiarity with the equipment used during the installation process
Knowledge of antenna systems
Appropriate training and medical certificate for working at heights
Good understanding of technical English
Qualifications for Test and Integration Personnel
Ericsson recommends that testing and integration personnel possess the
following skills:
Basic Ericsson RBS 2000 Operation and Maintenance knowledge.
Personnel should be familiar with the tools and instruments recommended
in the chapters Antenna System Tests, Site Installation Tests, and RBS
Site Integration.
Basic GSM knowledge
Basic RBS 2000 knowledge
Good understanding of technical English
1.3 Installation and Integration Process Overview
This section describes the overall Installation and Integration process. This
process covers the work that follows the Installation Engineering process:
testing the antenna system, installing the cabinet, performing site installation
tests, and integrating the site into the network. A process overview is shown
below.
4 E
N/LZT 720 0090 Uen R1A 2004-09-17