User's Manual Part 1

RBS 2109 User’s Guide
1
Remove the connection frame
from the IXU.
P010126A
2
Remove the cable gland parts
and remove the sealing insert.
Route the cable through the
cable gland parts and strip the
cable insulation. Cut the cable
screen according to the figure.
P010463B
10 mm
3
Strip the conduc
tors and fold
back the cable sc
reen over the
inner part of th
e cable gland.
P010464B
10 mm
4
Insert the cable into the most
suitable inlet and tighten the
cable gland.
P010512A
57EN/LZT 720 0090 Uen R1A 2004-09-17