User's Manual Part 1

RBS 2109 User’s Guide
P010152A
B
A
A
B
UP
A B
Figure 18 Installation Alternatives
A
Holes used for vertical poles
B
Holes used for horizontal poles
2. Ensure that the washers are mounted correctly and attach the two clamps
with the screws and washers. See Figure below.
Note: Ensure that the recess is attached in the correct direction.
P010171A
Recess
UP
Figure 19 Fastening Clamps to the Wall Bracket
3. Position the wall bracket on the pole and mount the clamps, tightening
the screws alternately to avoid bending them. Ensure that the washers
are mounted correctly.
45EN/LZT 720 0090 Uen R1A 2004-09-17