User's Manual Part 1

RBS 2109 User’s Guide
P002646A
Figure 15 Electrostatic Discharge Hazard Symbol
3.3 Batteries
This section provides information on damage that can be caused to products
containing batteries that are damaged.
3.3.1 Overheated Batteries
Caution!
Do! Check batteries for signs of overheating. The casing surrounding
overheated batteries can be soft and warped. Replace damaged batteries
according to instructions.
If it is suspected that batteries are overheated, check the following:
• The internal temperature of the equipment is below +60 C (140 F).
• Batteries have not leaked.
Corrective Actions
1. Replace overheated batteries.
2. Treat leakages from batteries as described in Section 3.3.2 Treating
Hazardous Waste from Leaks on page 27.
3.3.2 Treating Hazardous Waste from Leaks
Caution!
Do! Check batteries for acid leakage. Acid can corrode the product. Replace
leaking batteries according to instructions.
27EN/LZT 720 0090 Uen R1A 2004-09-17