User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Product Safety Requirements RBS 2000
- 3 Environmental Capabilities
- 3.1 Scope
- 3.2 Terminology
- 3.3 References
- 3.4 Transport -40 C – +70 C
- 3.5 Storage -25 C – +55 C
- 3.6 Handling -40 C – +70 C
- 3.7 Operation Indoor +5 C – +40 C
- 3.8 Operation Outdoor -33 C – +40 C
- 3.9 Operation Outdoor -33 C – +45 C
- 3.10 Operation Outdoor -33 C – +55 C
- 3.11 Operation Mast-Mounted Equipment -33 C – +45 C
- 3.12 Operation Mast-Mounted Equipment -40 C – +55 C
- 4 Climate Protection
- 5 EMC Capabilities
- RBS 2101, Product Description
- RBS 2102, Product Description
- RBS 2103, Product Description
- RBS 2202, Product Description
- RBS 2101, 2102, 2103 & 2202 Radio Configurations
- RBS 2202 Antenna Configurations
- ACCU Description
- BFU Description
- CDU-A Description
- CDU-C Description
- CDU-C+ Description
- CDU-D Description
- DXU Description
- DXU-21 Description
- ECU Description
- PSU -48 V Description
- PSU 230 V Description
- sTRU Single Transceiver Unit Description
- V3 Climate Unit Description
- Glossary
RBS 2103Macro Outdoor
5.2 Optional Hardware Units
05_0191C
Isolator switch
1
0
BFU
BFU 1
BFU 2
DC connectors
Batteries
Strap
Batteries
Temp sensor
Figure 5 Optional Hardware Units
Batteries
The RBS 2103 can be equipped with two battery blocks to supply back-up
power in the event of mains failure.
BIAS-IC - Bias Injector
The BIAS-IC provides DC power from the Control Module (CM) to the Tower
Mounted Amplifier (TMA). Up to two bias injectors can be connected to one CM.
12 (20)
EN/LZT 720 0 221 Ue n R1A