User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Product Safety Requirements RBS 2000
- 3 Environmental Capabilities
- 3.1 Scope
- 3.2 Terminology
- 3.3 References
- 3.4 Transport -40 C – +70 C
- 3.5 Storage -25 C – +55 C
- 3.6 Handling -40 C – +70 C
- 3.7 Operation Indoor +5 C – +40 C
- 3.8 Operation Outdoor -33 C – +40 C
- 3.9 Operation Outdoor -33 C – +45 C
- 3.10 Operation Outdoor -33 C – +55 C
- 3.11 Operation Mast-Mounted Equipment -33 C – +45 C
- 3.12 Operation Mast-Mounted Equipment -40 C – +55 C
- 4 Climate Protection
- 5 EMC Capabilities
- RBS 2101, Product Description
- RBS 2102, Product Description
- RBS 2103, Product Description
- RBS 2202, Product Description
- RBS 2101, 2102, 2103 & 2202 Radio Configurations
- RBS 2202 Antenna Configurations
- ACCU Description
- BFU Description
- CDU-A Description
- CDU-C Description
- CDU-C+ Description
- CDU-D Description
- DXU Description
- DXU-21 Description
- ECU Description
- PSU -48 V Description
- PSU 230 V Description
- sTRU Single Transceiver Unit Description
- V3 Climate Unit Description
- Glossary
RBS 2103 Macro Outdoor
5 Hardware Units
This section describes the standard and optional hardware units for the
RBS 2103.
01_0075C
Transport
module
Space for
DC/DC
(optional)
Space for
splice tray
(optional)
IDM/Fans
Service
outlet
Earth
bar
ACB
TM
fuse panel
Mains input
filter
Base frame
PSUs
BFU
Fan tray
Batteries
ACCU
Batteries
TRUs
CDUs
ECU
DXU
Cabinet
BFU
Bus bar
Figure 4 Standard Hardware Units
5.1 Standard Hardware
ACCU - AC Connection Unit
The ACCU provides the fusing and circuit breakers f or the AC mains supply.
The ACCU also provides and AC service outlet for test instruments. The AC
mains switch l ocated on the A CCU disconnects the RBS from the AC mains
supply.
9 (20)
EN/LZT 720 0221 Uen R1A