User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Product Safety Requirements RBS 2000
- 3 Environmental Capabilities
- 3.1 Scope
- 3.2 Terminology
- 3.3 References
- 3.4 Transport -40 C – +70 C
- 3.5 Storage -25 C – +55 C
- 3.6 Handling -40 C – +70 C
- 3.7 Operation Indoor +5 C – +40 C
- 3.8 Operation Outdoor -33 C – +40 C
- 3.9 Operation Outdoor -33 C – +45 C
- 3.10 Operation Outdoor -33 C – +55 C
- 3.11 Operation Mast-Mounted Equipment -33 C – +45 C
- 3.12 Operation Mast-Mounted Equipment -40 C – +55 C
- 4 Climate Protection
- 5 EMC Capabilities
- RBS 2101, Product Description
- RBS 2102, Product Description
- RBS 2103, Product Description
- RBS 2202, Product Description
- RBS 2101, 2102, 2103 & 2202 Radio Configurations
- RBS 2202 Antenna Configurations
- ACCU Description
- BFU Description
- CDU-A Description
- CDU-C Description
- CDU-C+ Description
- CDU-D Description
- DXU Description
- DXU-21 Description
- ECU Description
- PSU -48 V Description
- PSU 230 V Description
- sTRU Single Transceiver Unit Description
- V3 Climate Unit Description
- Glossary
RBS 2102 Macro Outdoor RBS
10.2 North America
The RBS complies to the North American legal requirements regarding product
safety, EMC, (Electromagnetic Compatibility) and Radio.
To show compliance to this the RBS has a Listing mark for product safety and
FCC/IC labels for EMC (Electromagnetic Compatibility) and Radio.
11 Dependability
The RBS 2102 is designed for a technical lifetime of 25 years (24-hour
operation). The following preventive maintenance conditions must be fulfilled to
guarantee the availability of the RBS:
Batteries: The batteries must be regularly inspected every year
(oxide on the pole terminals). The batteries should
be replaced according to the recommendations of the
battery supplier.
12 Vandal Resistance
The RBS 2102 fulfils Ericsson’s requirements for vandal resistance.
23 (24)
EN/LZT 720 0220 Uen R2A