User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Product Safety Requirements RBS 2000
- 3 Environmental Capabilities
- 3.1 Scope
- 3.2 Terminology
- 3.3 References
- 3.4 Transport -40 C – +70 C
- 3.5 Storage -25 C – +55 C
- 3.6 Handling -40 C – +70 C
- 3.7 Operation Indoor +5 C – +40 C
- 3.8 Operation Outdoor -33 C – +40 C
- 3.9 Operation Outdoor -33 C – +45 C
- 3.10 Operation Outdoor -33 C – +55 C
- 3.11 Operation Mast-Mounted Equipment -33 C – +45 C
- 3.12 Operation Mast-Mounted Equipment -40 C – +55 C
- 4 Climate Protection
- 5 EMC Capabilities
- RBS 2101, Product Description
- RBS 2102, Product Description
- RBS 2103, Product Description
- RBS 2202, Product Description
- RBS 2101, 2102, 2103 & 2202 Radio Configurations
- RBS 2202 Antenna Configurations
- ACCU Description
- BFU Description
- CDU-A Description
- CDU-C Description
- CDU-C+ Description
- CDU-D Description
- DXU Description
- DXU-21 Description
- ECU Description
- PSU -48 V Description
- PSU 230 V Description
- sTRU Single Transceiver Unit Description
- V3 Climate Unit Description
- Glossary
RBS 2102 Macro Outdoor RBS
Climate
System
Power
System
DXU
CDU
EACU
DC/DC
ACCU
Transport
Module
Battery
Temp.
Sensor
DC supply
(+24 or -48)
DC supply
(+24 or -48)
Service
Outlet
+24 V
DC
G.703
External alarms
Local Bus
Timing Bus
X-Bus
AC
mains
supply
External
Batteries
(optional)
Transport
Network
Interface
External
Synch-
ronization
Bus to/from
other RBS
External
Alarms
RF to/from
antenna
feeders
(DC to
ALNA)
RF to/from
additional
cabinet
Bus
Extension
Earthing
AC
RBS 2102
OMT
GPS
P005520C
Y-link used
for sTRU in
extension
cabinet
Figure 7 RBS 2102 Interfaces
6.1 External Connections
External connections provided by the RBS 2102 include the following:
• Transmission
• AC mains
• Antennas
17 (24)
EN/LZT 720 0220 Uen R2A