User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Product Safety Requirements RBS 2000
- 3 Environmental Capabilities
- 3.1 Scope
- 3.2 Terminology
- 3.3 References
- 3.4 Transport -40 C – +70 C
- 3.5 Storage -25 C – +55 C
- 3.6 Handling -40 C – +70 C
- 3.7 Operation Indoor +5 C – +40 C
- 3.8 Operation Outdoor -33 C – +40 C
- 3.9 Operation Outdoor -33 C – +45 C
- 3.10 Operation Outdoor -33 C – +55 C
- 3.11 Operation Mast-Mounted Equipment -33 C – +45 C
- 3.12 Operation Mast-Mounted Equipment -40 C – +55 C
- 4 Climate Protection
- 5 EMC Capabilities
- RBS 2101, Product Description
- RBS 2102, Product Description
- RBS 2103, Product Description
- RBS 2202, Product Description
- RBS 2101, 2102, 2103 & 2202 Radio Configurations
- RBS 2202 Antenna Configurations
- ACCU Description
- BFU Description
- CDU-A Description
- CDU-C Description
- CDU-C+ Description
- CDU-D Description
- DXU Description
- DXU-21 Description
- ECU Description
- PSU -48 V Description
- PSU 230 V Description
- sTRU Single Transceiver Unit Description
- V3 Climate Unit Description
- Glossary
RBS 2102 Macro Outdoor RBS
5.1 Standard Hardware Units
P003197C
TRUs
Radio
cabinet
CDUs
AC circuit
breakers
Transport
module
Installation
frame
B
F
U
ECU
DXU
Batteries
PSUs
IDM
AC Connection
box
Earth bar
Base frame
option
EACU
DC/DC
Converter
-48V
ACCU
Climate unit
Figure 6 Standard Hardware Units
ACCU - AC Connection Unit
The ACCU provides the supervision and circuit breakers for the AC mains
supply. The ACCU also provides and AC service outlet for test instruments.
The AC mains switch located on the ACCU disconnects the RBS from the
AC mains supply.
Number of units: 1.
BFU – Battery Fuse Unit
The BFU provides a battery circuit breaker for one battery and connects the
battery to the +24 V DC busbar.
Number of units: 0 – 2.
13 (24)
EN/LZT 720 0220 Uen R2A