User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Product Safety Requirements RBS 2000
- 3 Environmental Capabilities
- 3.1 Scope
- 3.2 Terminology
- 3.3 References
- 3.4 Transport -40 C – +70 C
- 3.5 Storage -25 C – +55 C
- 3.6 Handling -40 C – +70 C
- 3.7 Operation Indoor +5 C – +40 C
- 3.8 Operation Outdoor -33 C – +40 C
- 3.9 Operation Outdoor -33 C – +45 C
- 3.10 Operation Outdoor -33 C – +55 C
- 3.11 Operation Mast-Mounted Equipment -33 C – +45 C
- 3.12 Operation Mast-Mounted Equipment -40 C – +55 C
- 4 Climate Protection
- 5 EMC Capabilities
- RBS 2101, Product Description
- RBS 2102, Product Description
- RBS 2103, Product Description
- RBS 2202, Product Description
- RBS 2101, 2102, 2103 & 2202 Radio Configurations
- RBS 2202 Antenna Configurations
- ACCU Description
- BFU Description
- CDU-A Description
- CDU-C Description
- CDU-C+ Description
- CDU-D Description
- DXU Description
- DXU-21 Description
- ECU Description
- PSU -48 V Description
- PSU 230 V Description
- sTRU Single Transceiver Unit Description
- V3 Climate Unit Description
- Glossary
RBS 2102 Macro Outdoor RBS
1 Product Overview
The RBS 2102 is a fully integrated outdoor macro RBS that can be ground
or roof mounted. It provides a durable, vandal resistant and weatherproof
enclosure. The RBS 2102 can be configured in an omni-cell or multi-sector
configuration.
1.1 Main Features
The RBS 2102 supports the following features of the RBS 2000 family:
• Frequency hopping
• Receiver diversity
• Duplex filtering
• Dynamic power regulation
• Discontinuous transmission/reception
• Encryption/ciphering
• Master – Extension configuration
• Frequencies:
− GSM 900
− GSM 1800
− GSM 1900
• Transmission alternatives:
− T1 - 1.5 Mbit/s, 100
, with internal synchronisation
− E1 - 2.0 Mbit/s, 75
, with PCM synchronisation
− E1 - 2.0 Mbit/s, 120 , with PCM synchronisation
• EDGE, requires DXU-21A and EDGE sTRU(s)
• GPS Synchronization, requires DXU-21A
• TG-synchronization, requires DXU-11 or DXU-21A
1.2 Optional Equipment
The RBS 2102 is available with the following optional equipment:
• Base frame
3 (24)
EN/LZT 720 0220 Uen R2A