User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Product Safety Requirements RBS 2000
- 3 Environmental Capabilities
- 3.1 Scope
- 3.2 Terminology
- 3.3 References
- 3.4 Transport -40 C – +70 C
- 3.5 Storage -25 C – +55 C
- 3.6 Handling -40 C – +70 C
- 3.7 Operation Indoor +5 C – +40 C
- 3.8 Operation Outdoor -33 C – +40 C
- 3.9 Operation Outdoor -33 C – +45 C
- 3.10 Operation Outdoor -33 C – +55 C
- 3.11 Operation Mast-Mounted Equipment -33 C – +45 C
- 3.12 Operation Mast-Mounted Equipment -40 C – +55 C
- 4 Climate Protection
- 5 EMC Capabilities
- RBS 2101, Product Description
- RBS 2102, Product Description
- RBS 2103, Product Description
- RBS 2202, Product Description
- RBS 2101, 2102, 2103 & 2202 Radio Configurations
- RBS 2202 Antenna Configurations
- ACCU Description
- BFU Description
- CDU-A Description
- CDU-C Description
- CDU-C+ Description
- CDU-D Description
- DXU Description
- DXU-21 Description
- ECU Description
- PSU -48 V Description
- PSU 230 V Description
- sTRU Single Transceiver Unit Description
- V3 Climate Unit Description
- Glossary
RBS 2101 Macro Outdoor
Barcode
The barcode for product identification is readable without disrupting RBS
function.
7 Power System
The RBS 2101 power system consists of the 115/230 V AC supply voltage
inputs, internal DC power supply, and the battery back-up system.
7.1 Power Supply
The RBS 2101 operates on 115 V AC or 230 V AC. The mains voltage is
selected by a switch located in the power termination box.
Note: A lockable mains disconnect switch must be provided close to the
RBS 2101 to facilitate maintenance and repair activities.
7.2 Operating Voltage
The RBS 2101 operating voltage is shown in the table below.
Table 7 Operating Voltage
Voltage Tolerance Frequency
200 – 240 V AC (single
phase)
± 10% 50 Hz
120/240 V AC (single
phase)
± 8% 60 Hz
7.3 Power Consumption
The power consumption of the cabinet is shown in the table below.
15 (18)
EN/LZT 720 0219 Uen R2A