User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Product Safety Requirements RBS 2000
- 3 Environmental Capabilities
- 3.1 Scope
- 3.2 Terminology
- 3.3 References
- 3.4 Transport -40 C – +70 C
- 3.5 Storage -25 C – +55 C
- 3.6 Handling -40 C – +70 C
- 3.7 Operation Indoor +5 C – +40 C
- 3.8 Operation Outdoor -33 C – +40 C
- 3.9 Operation Outdoor -33 C – +45 C
- 3.10 Operation Outdoor -33 C – +55 C
- 3.11 Operation Mast-Mounted Equipment -33 C – +45 C
- 3.12 Operation Mast-Mounted Equipment -40 C – +55 C
- 4 Climate Protection
- 5 EMC Capabilities
- RBS 2101, Product Description
- RBS 2102, Product Description
- RBS 2103, Product Description
- RBS 2202, Product Description
- RBS 2101, 2102, 2103 & 2202 Radio Configurations
- RBS 2202 Antenna Configurations
- ACCU Description
- BFU Description
- CDU-A Description
- CDU-C Description
- CDU-C+ Description
- CDU-D Description
- DXU Description
- DXU-21 Description
- ECU Description
- PSU -48 V Description
- PSU 230 V Description
- sTRU Single Transceiver Unit Description
- V3 Climate Unit Description
- Glossary
RBS 2101Macro Outdoor
• Display software version
• Create or modify the IDB
• Define external alarms
• Modify or display O&M parameters
• Define PCM interface
• Define TMA parameters
• Monitor and display fault status
6.3 Operator interface
The Man Machine Interface (MMI) in the RBS 2101 is comprised of optical
indicators, buttons and switches on units in the cabinet. The information here is
general. For a more detailed description of the indicators, buttons and switches
on the various RUs in the cabinet, see the respective units’ description in this
manual.
Optical Indicators
Several units in the RBS have optical indicators that show the operational
status of the unit. The indicators reflect faults, mode change and operation.
Buttons and Switches
Buttons and switches can be found on several RUs. The table below takes into
account only the buttons on the DXU and TRUs.
Table 6 Buttons
Button Description
TRU reset Resets the TRU
DXU reset Resets the DXU
Local/remote mode Changes the mode between local
and remote. On the TRU this applies
to the TRU only, on the DXU this
applies to the whole RBS.
Test call Not used
14 (18)
E
N/LZT 720 0219 Uen R2A