User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Product Safety Requirements RBS 2000
- 3 Environmental Capabilities
- 3.1 Scope
- 3.2 Terminology
- 3.3 References
- 3.4 Transport -40 C – +70 C
- 3.5 Storage -25 C – +55 C
- 3.6 Handling -40 C – +70 C
- 3.7 Operation Indoor +5 C – +40 C
- 3.8 Operation Outdoor -33 C – +40 C
- 3.9 Operation Outdoor -33 C – +45 C
- 3.10 Operation Outdoor -33 C – +55 C
- 3.11 Operation Mast-Mounted Equipment -33 C – +45 C
- 3.12 Operation Mast-Mounted Equipment -40 C – +55 C
- 4 Climate Protection
- 5 EMC Capabilities
- RBS 2101, Product Description
- RBS 2102, Product Description
- RBS 2103, Product Description
- RBS 2202, Product Description
- RBS 2101, 2102, 2103 & 2202 Radio Configurations
- RBS 2202 Antenna Configurations
- ACCU Description
- BFU Description
- CDU-A Description
- CDU-C Description
- CDU-C+ Description
- CDU-D Description
- DXU Description
- DXU-21 Description
- ECU Description
- PSU -48 V Description
- PSU 230 V Description
- sTRU Single Transceiver Unit Description
- V3 Climate Unit Description
- Glossary
RBS 2101Macro Outdoor
5 Hardware Units
This section describes the standard and optional hardware units for the
RBS 2101 in the following areas of the RBS:
• Radio sub-cabinet
• Mounting base
• Climate sub-cabinet
08_0262C
Climate sub-cabinet
Radio sub-cabinet
ECU
DXU
PSUs
TM space
ACCU
Earth bar
Mounting base
Fan unit
CDU
TRUs
AC mains switch
DC switch
DC/DC Conv.
for TM
IDM incl.
battery or BDM
AC service outlet
Figure 3 Standard Hardware Units
5.1 Radio Sub-cabinet
The radio sub-cabinet contains the radio equipment for the RBS. The hardware
units located in the radio sub-cabinet include the following:
8 (18)
E
N/LZT 720 0219 Uen R2A