User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Product Safety Requirements RBS 2000
- 3 Environmental Capabilities
- 3.1 Scope
- 3.2 Terminology
- 3.3 References
- 3.4 Transport -40 C – +70 C
- 3.5 Storage -25 C – +55 C
- 3.6 Handling -40 C – +70 C
- 3.7 Operation Indoor +5 C – +40 C
- 3.8 Operation Outdoor -33 C – +40 C
- 3.9 Operation Outdoor -33 C – +45 C
- 3.10 Operation Outdoor -33 C – +55 C
- 3.11 Operation Mast-Mounted Equipment -33 C – +45 C
- 3.12 Operation Mast-Mounted Equipment -40 C – +55 C
- 4 Climate Protection
- 5 EMC Capabilities
- RBS 2101, Product Description
- RBS 2102, Product Description
- RBS 2103, Product Description
- RBS 2202, Product Description
- RBS 2101, 2102, 2103 & 2202 Radio Configurations
- RBS 2202 Antenna Configurations
- ACCU Description
- BFU Description
- CDU-A Description
- CDU-C Description
- CDU-C+ Description
- CDU-D Description
- DXU Description
- DXU-21 Description
- ECU Description
- PSU -48 V Description
- PSU 230 V Description
- sTRU Single Transceiver Unit Description
- V3 Climate Unit Description
- Glossary
RBS 2101Macro Outdoor
3 Space Requirements
RBS 2101 installations require a minimum spacing for proper airflow and to
provide a sufficient working area.
Additional
cabinet
Additional
cabinet
Cabinet
705
450
20+20
450
700
(The air intake requires
at least 20 mm free space
around each cabinet)
*
*
04_0073B
Unit of measurement: mm
Figure 2 Space Requirements with Extension Cabinets
To enable proper airflow through the climate unit, the rear side of the RBS 2101
must not be mounted closer than 20 mm to a wall or 40 mm to an adjacent
cabinet. Space for future expansion must be considered when installing units.
4 Environment
This section provides an overview of the operating environment, environmental
impact, and materials used in the RBS 2101.
4.1 Operating Environment
The operating environment and climatic specifications for the RBS 2101 are
shown in the table below.
6 (18)
E
N/LZT 720 0219 Uen R2A