User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Product Safety Requirements RBS 2000
- 3 Environmental Capabilities
- 3.1 Scope
- 3.2 Terminology
- 3.3 References
- 3.4 Transport -40 C – +70 C
- 3.5 Storage -25 C – +55 C
- 3.6 Handling -40 C – +70 C
- 3.7 Operation Indoor +5 C – +40 C
- 3.8 Operation Outdoor -33 C – +40 C
- 3.9 Operation Outdoor -33 C – +45 C
- 3.10 Operation Outdoor -33 C – +55 C
- 3.11 Operation Mast-Mounted Equipment -33 C – +45 C
- 3.12 Operation Mast-Mounted Equipment -40 C – +55 C
- 4 Climate Protection
- 5 EMC Capabilities
- RBS 2101, Product Description
- RBS 2102, Product Description
- RBS 2103, Product Description
- RBS 2202, Product Description
- RBS 2101, 2102, 2103 & 2202 Radio Configurations
- RBS 2202 Antenna Configurations
- ACCU Description
- BFU Description
- CDU-A Description
- CDU-C Description
- CDU-C+ Description
- CDU-D Description
- DXU Description
- DXU-21 Description
- ECU Description
- PSU -48 V Description
- PSU 230 V Description
- sTRU Single Transceiver Unit Description
- V3 Climate Unit Description
- Glossary
V3 Clim ate U nitClimate Unit for RB S 2102
Table 4 CCU Switches
Label Function
Comp Starts and stops compressor test function.
Heat Starts heater function.
Ericsson AB
SE-164 80 Stockholm
Sweden
asq.us@ericsson.com
No part of this document may be produced in any form without
the w ritten perm ission of the c opyright ow ner.
The c ontents of this document are subject to revision without
notice due to continued progress in methodology, design and
manufacturing
Ericsson shall have no liability for any error or damages of any
kind resulting from the use of this doc ument
© Ericsson 2003 — All Rights Reserved
8(8)
EN/LZT 720 0 280 Ue n R1A