User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Product Safety Requirements RBS 2000
- 3 Environmental Capabilities
- 3.1 Scope
- 3.2 Terminology
- 3.3 References
- 3.4 Transport -40 C – +70 C
- 3.5 Storage -25 C – +55 C
- 3.6 Handling -40 C – +70 C
- 3.7 Operation Indoor +5 C – +40 C
- 3.8 Operation Outdoor -33 C – +40 C
- 3.9 Operation Outdoor -33 C – +45 C
- 3.10 Operation Outdoor -33 C – +55 C
- 3.11 Operation Mast-Mounted Equipment -33 C – +45 C
- 3.12 Operation Mast-Mounted Equipment -40 C – +55 C
- 4 Climate Protection
- 5 EMC Capabilities
- RBS 2101, Product Description
- RBS 2102, Product Description
- RBS 2103, Product Description
- RBS 2202, Product Description
- RBS 2101, 2102, 2103 & 2202 Radio Configurations
- RBS 2202 Antenna Configurations
- ACCU Description
- BFU Description
- CDU-A Description
- CDU-C Description
- CDU-C+ Description
- CDU-D Description
- DXU Description
- DXU-21 Description
- ECU Description
- PSU -48 V Description
- PSU 230 V Description
- sTRU Single Transceiver Unit Description
- V3 Climate Unit Description
- Glossary
V3 Climate Unit Climate Unit for RBS 2102
SUPPLY
COMPR. ON
COMPR. FAIL
HEAT
FAN FAIL
CCU
P006252B
Comp Heat
CCU control board
Figure 3 CCU Optical Indicators (left) and Switches (right)
Table 3 CCU Optical Indicators
Label
Colour
Mode Indication
Off The
re is no power to the CC U
SUP
PLY
Gre
en
On There is power to the CCU
Off The compressor is not operational.COMPR. ON Yellow
On The compressor is operational.
Off N o faults detected in the compressor.COMPR. FAIL Yellow
On One or more faults detected in the
compressor.
Off The heater is not operational.HEAT Yellow
On The heater is operational.
Off No f
aults detected in the external or
internal fans.
FAN
FAIL
Yel
low
On One or more faults detected in the
external or internal fans.
7(8)
EN/LZT 720 0280 Uen R1A