User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Product Safety Requirements RBS 2000
- 3 Environmental Capabilities
- 3.1 Scope
- 3.2 Terminology
- 3.3 References
- 3.4 Transport -40 C – +70 C
- 3.5 Storage -25 C – +55 C
- 3.6 Handling -40 C – +70 C
- 3.7 Operation Indoor +5 C – +40 C
- 3.8 Operation Outdoor -33 C – +40 C
- 3.9 Operation Outdoor -33 C – +45 C
- 3.10 Operation Outdoor -33 C – +55 C
- 3.11 Operation Mast-Mounted Equipment -33 C – +45 C
- 3.12 Operation Mast-Mounted Equipment -40 C – +55 C
- 4 Climate Protection
- 5 EMC Capabilities
- RBS 2101, Product Description
- RBS 2102, Product Description
- RBS 2103, Product Description
- RBS 2202, Product Description
- RBS 2101, 2102, 2103 & 2202 Radio Configurations
- RBS 2202 Antenna Configurations
- ACCU Description
- BFU Description
- CDU-A Description
- CDU-C Description
- CDU-C+ Description
- CDU-D Description
- DXU Description
- DXU-21 Description
- ECU Description
- PSU -48 V Description
- PSU 230 V Description
- sTRU Single Transceiver Unit Description
- V3 Climate Unit Description
- Glossary
PSU 230 V Power Supply Unit
1 Product Overview
The PSU 230 V rectifies the incoming AC power to the regulated DC voltage
required.
1.1 Main Functions
The PSU 230 rectifies the incoming AC power to the regulated DC voltage
required.
The PSUs are designed for single or parallel use.
2 Dimensions
This section describes the physical characteristics of the PSU. The PSU size
and weight are given in the table below.
Table 1 Size and Weight
Height Width Depth Weight
267 mm 61 mm 240 mm 3.6–4kg
3 Power Consumption and Heat Generation
Figures for power consumption and heat generation are shown in the table
below.
Table 2 Power Consumption and Heat Generation
Maximum power consumption Maximum heat generation
795 W 95 W
3 (10)
EN/LZT 720 0282 Uen R1A