User Manual

Table Of Contents
CDU-CCombining and Distribution Unit
5.2 Operator Interface
This section describes the operator interface, which consists of optical
indicators located on the front panel, see figure and table below.
P010468A
CDU-C
Fault
Operational
TX in 1 TX in 2
RX test
Figure 4 CDU-C Indicators
Table 4 CDU-C indicators
Indicator
Colour
Mode Description
Off No faults detected in CDU-C
On One or more faults detected in
CDU-C
Fault Red
Flashing Loss of communication to a
superior RU
Off CDU-C not operationalOperational Green
On CDU-C operational
Ericsson AB
SE-164 80 Stockholm
Sweden
asq.us@ericsson.com
No part of this document may be reproduced in any form without
the written permission of the copyright owner.
The contents of this document are subject to revision without
notice due to continued progress in methodology, design and
manufacturing.
Ericsson shall have no liability for any error or damages of any
kind resulting from the use of this document.
© Ericsson AB 2003 All Rights Reserved
10 (10)
EN/LZT 720 0277 Uen R1A