User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Product Safety Requirements RBS 2000
- 3 Environmental Capabilities
- 3.1 Scope
- 3.2 Terminology
- 3.3 References
- 3.4 Transport -40 C – +70 C
- 3.5 Storage -25 C – +55 C
- 3.6 Handling -40 C – +70 C
- 3.7 Operation Indoor +5 C – +40 C
- 3.8 Operation Outdoor -33 C – +40 C
- 3.9 Operation Outdoor -33 C – +45 C
- 3.10 Operation Outdoor -33 C – +55 C
- 3.11 Operation Mast-Mounted Equipment -33 C – +45 C
- 3.12 Operation Mast-Mounted Equipment -40 C – +55 C
- 4 Climate Protection
- 5 EMC Capabilities
- RBS 2101, Product Description
- RBS 2102, Product Description
- RBS 2103, Product Description
- RBS 2202, Product Description
- RBS 2101, 2102, 2103 & 2202 Radio Configurations
- RBS 2202 Antenna Configurations
- ACCU Description
- BFU Description
- CDU-A Description
- CDU-C Description
- CDU-C+ Description
- CDU-D Description
- DXU Description
- DXU-21 Description
- ECU Description
- PSU -48 V Description
- PSU 230 V Description
- sTRU Single Transceiver Unit Description
- V3 Climate Unit Description
- Glossary
ACCU AC Connection Unit
P010323A
AC Mains
Switch
Power in
Power out
Figure 3 Power Connections for Connection Box
Power Input
This section describes the power interface, external fuse, to the ACCU.
Table 3 External Fuse
External Fuse
Max. Min.
63 A/phase 40 A/phase
Vo
ltage and Power Output
This section describes the power interface from the ACCU. Output voltage and
output power values are given in the tables below.
Ta
ble 4 Output Voltage
Output Voltage
To internal users 200 - 250 V AC ±10%
To control unit, ECU 24 V AC
50 Hz ± 10%Frequency range
60 Hz ± 8%
7(8)
EN/LZT 720 0231 Uen R1A