User Manual

RBS 2101, RBS 2102, RBS 2103 and RBS 2202 Hardware Reference Manual
Requirements
Table 3 Environmental limits during transport
Environmental Parameters Unit Value
Temperature

C
-40 - +70
Relative humidity
% 5 -100
Absolute humidity g/m
3
1-29
Change of temperature

C/min
0.5
Rain intensity mm/min
6
Change of temp

C
-30 /+22
3.4.3 Biological Conditions
The severity of these requirements is in conformity with: IEC 721-3-2 class
2B2. and ETS 300 019-1-2 Class 2.3.
3.4.4 Chemically Active Substances
The severity of these requirements is in conformity with: IEC 721-3-2 class
2C2. and ETS 300 019-1-2 Class 2.3.
Note: The values are average yearly levels of airborne contaminants that can
be accepted. It is assumed that one of the contaminants is dominant at
each site, and that the other is present in insignificant amounts.
3.4.5 Mechanically Active Substances
The severity of these requirements is in conformity with: IEC 721-3-2 class
2S2. and ETS 300 019-1-2 Class 2.3.
3.4.6 Mechanical Conditions
The packing and transport method shall be chosen in order not to expose
the equipment to stress beyond these limits. The equipment shall function
as specified when installed after test.
The severity of these requirements is in conformity with: IEC 721-3-2 class
2M2. and ETS 300 019-1-2 Class 2.3.
11
EN/LZT 720 0023 Uen R3B 2010-06-10