User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Product Safety Requirements RBS 2000
- 3 Environmental Capabilities
- 3.1 Scope
- 3.2 Terminology
- 3.3 References
- 3.4 Transport -40 C – +70 C
- 3.5 Storage -25 C – +55 C
- 3.6 Handling -40 C – +70 C
- 3.7 Operation Indoor +5 C – +40 C
- 3.8 Operation Outdoor -33 C – +40 C
- 3.9 Operation Outdoor -33 C – +45 C
- 3.10 Operation Outdoor -33 C – +55 C
- 3.11 Operation Mast-Mounted Equipment -33 C – +45 C
- 3.12 Operation Mast-Mounted Equipment -40 C – +55 C
- 4 Climate Protection
- 5 EMC Capabilities
- RBS 2101, Product Description
- RBS 2102, Product Description
- RBS 2103, Product Description
- RBS 2202, Product Description
- RBS 2101, 2102, 2103 & 2202 Radio Configurations
- RBS 2202 Antenna Configurations
- ACCU Description
- BFU Description
- CDU-A Description
- CDU-C Description
- CDU-C+ Description
- CDU-D Description
- DXU Description
- DXU-21 Description
- ECU Description
- PSU -48 V Description
- PSU 230 V Description
- sTRU Single Transceiver Unit Description
- V3 Climate Unit Description
- Glossary
ACCUAC Connection Unit
2 Dimensions
This section describes the dimensions of the Basic Unit and the Connection
Box.
Basic Unit
Size and weight of the Basic Unit are shown in the table below.
Table 1 Dimensions of the Basic Unit
Height Width Depth Weight
367 mm 504 mm 149 mm 12 kg
Note: Height, width and depth dimensions in the table above include the
rear plate and handle.
Connection Box
Size and weight of the Connection Box are shown in the table below.
Table 2 Dimensions of the Connection Box
Height Width Depth Weight
340 mm 160 mm 87 mm 5kg
4(8)
EN/LZT 720 0231 Uen R1A