User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Product Safety Requirements RBS 2000
- 3 Environmental Capabilities
- 3.1 Scope
- 3.2 Terminology
- 3.3 References
- 3.4 Transport -40 C – +70 C
- 3.5 Storage -25 C – +55 C
- 3.6 Handling -40 C – +70 C
- 3.7 Operation Indoor +5 C – +40 C
- 3.8 Operation Outdoor -33 C – +40 C
- 3.9 Operation Outdoor -33 C – +45 C
- 3.10 Operation Outdoor -33 C – +55 C
- 3.11 Operation Mast-Mounted Equipment -33 C – +45 C
- 3.12 Operation Mast-Mounted Equipment -40 C – +55 C
- 4 Climate Protection
- 5 EMC Capabilities
- RBS 2101, Product Description
- RBS 2102, Product Description
- RBS 2103, Product Description
- RBS 2202, Product Description
- RBS 2101, 2102, 2103 & 2202 Radio Configurations
- RBS 2202 Antenna Configurations
- ACCU Description
- BFU Description
- CDU-A Description
- CDU-C Description
- CDU-C+ Description
- CDU-D Description
- DXU Description
- DXU-21 Description
- ECU Description
- PSU -48 V Description
- PSU 230 V Description
- sTRU Single Transceiver Unit Description
- V3 Climate Unit Description
- Glossary
RBS 2202Antenna Configurations
Table 21 1x12 CDU-D without Duplexer
Cell CDU
Feeder label
Connector Signal
Master
A:TX1 A3 TX
A:RXA A1 RX A
A:RXB D1 RX B
— A2 HL out A2
1
— D3 HL in B2
Exten
sion
A:TX2 A3 TX
— A2 HL in A
A
1
— D3 HL in B
Ericsson AB
SE-164 80 Stockholm
Sweden
asq.us@ericsson.com
No part of this doc ument may be reproduced in a ny form without
the w ritten perm ission of the c opyright ow ner.
The c ontents of this document are subject to revision without
notice due to continued progress in methodology, design and
manufacturing.
Ericsson shall have no liability for any error or damages of any
kind re sulting from the use o f this document.
© Ericsson 2003 — All Rights Reserved
32 (32)
EN/LZT 720 0 342 Ue n R1A