User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Product Safety Requirements RBS 2000
- 3 Environmental Capabilities
- 3.1 Scope
- 3.2 Terminology
- 3.3 References
- 3.4 Transport -40 C – +70 C
- 3.5 Storage -25 C – +55 C
- 3.6 Handling -40 C – +70 C
- 3.7 Operation Indoor +5 C – +40 C
- 3.8 Operation Outdoor -33 C – +40 C
- 3.9 Operation Outdoor -33 C – +45 C
- 3.10 Operation Outdoor -33 C – +55 C
- 3.11 Operation Mast-Mounted Equipment -33 C – +45 C
- 3.12 Operation Mast-Mounted Equipment -40 C – +55 C
- 4 Climate Protection
- 5 EMC Capabilities
- RBS 2101, Product Description
- RBS 2102, Product Description
- RBS 2103, Product Description
- RBS 2202, Product Description
- RBS 2101, 2102, 2103 & 2202 Radio Configurations
- RBS 2202 Antenna Configurations
- ACCU Description
- BFU Description
- CDU-A Description
- CDU-C Description
- CDU-C+ Description
- CDU-D Description
- DXU Description
- DXU-21 Description
- ECU Description
- PSU -48 V Description
- PSU 230 V Description
- sTRU Single Transceiver Unit Description
- V3 Climate Unit Description
- Glossary
RBS 2202 Antenna Configurations
Table 16 3x4 CDU-C+ without Duplexer
Cell CDU
Feeder label
Connector Signal
Master:
A:TX1 H1 TX 11
A:RXA H2 RX A
A:TX2 H3 TX 2
A
2
A:RXB J3 RX B
B:TX1 J3 TX 13
B:RXA J1 RX A
Extension:
B:TX2 H1 TX 2
B
1
B:RXB H2 RX B
C:TX1 H3 TX 12
C:RXA J3 RX A
C:TX2 J2 TX 2
C
3
C:RXB J1 RX B
For information about connections between master and extension cabinets, see:
RBS 2102, RBS 2102, RBS 2103
and RBS 2202 Cabinet
Reconfiguration Manual
EN/LZT 720 0048
25 (32)
EN/LZT 720 0342 Uen R1A