User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Product Safety Requirements RBS 2000
- 3 Environmental Capabilities
- 3.1 Scope
- 3.2 Terminology
- 3.3 References
- 3.4 Transport -40 C – +70 C
- 3.5 Storage -25 C – +55 C
- 3.6 Handling -40 C – +70 C
- 3.7 Operation Indoor +5 C – +40 C
- 3.8 Operation Outdoor -33 C – +40 C
- 3.9 Operation Outdoor -33 C – +45 C
- 3.10 Operation Outdoor -33 C – +55 C
- 3.11 Operation Mast-Mounted Equipment -33 C – +45 C
- 3.12 Operation Mast-Mounted Equipment -40 C – +55 C
- 4 Climate Protection
- 5 EMC Capabilities
- RBS 2101, Product Description
- RBS 2102, Product Description
- RBS 2103, Product Description
- RBS 2202, Product Description
- RBS 2101, 2102, 2103 & 2202 Radio Configurations
- RBS 2202 Antenna Configurations
- ACCU Description
- BFU Description
- CDU-A Description
- CDU-C Description
- CDU-C+ Description
- CDU-D Description
- DXU Description
- DXU-21 Description
- ECU Description
- PSU -48 V Description
- PSU 230 V Description
- sTRU Single Transceiver Unit Description
- V3 Climate Unit Description
- Glossary
RBS 2202Antenna Configurations
Table 10 CDU-A without Duplexer
Cell CDU
Feeder label
Connector Signal
A 1 A:TX 1 H1 TX 1
A:TX2 H2 TX 2
A:RXA A1 RX A
A:RXB A2 RX B
B 2 B:TX 1 H3 TX 1
B:TX2 J3 TX 2
B:RXA A3 RX A
B:RXB D3 RX B
C 3 C:TX 1 J2 TX 1
C:TX2 J1 TX 2
C:RXA D2 RX A
C:RXB D1 RX B
From this 3x2 CDU-A configuration, the following configurations can be derived:
• 1x2 CDU-A
• 2x2 CDU-A
16 (32)
EN/LZT 720 0 342 Ue n R1A