User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Product Safety Requirements RBS 2000
- 3 Environmental Capabilities
- 3.1 Scope
- 3.2 Terminology
- 3.3 References
- 3.4 Transport -40 C – +70 C
- 3.5 Storage -25 C – +55 C
- 3.6 Handling -40 C – +70 C
- 3.7 Operation Indoor +5 C – +40 C
- 3.8 Operation Outdoor -33 C – +40 C
- 3.9 Operation Outdoor -33 C – +45 C
- 3.10 Operation Outdoor -33 C – +55 C
- 3.11 Operation Mast-Mounted Equipment -33 C – +45 C
- 3.12 Operation Mast-Mounted Equipment -40 C – +55 C
- 4 Climate Protection
- 5 EMC Capabilities
- RBS 2101, Product Description
- RBS 2102, Product Description
- RBS 2103, Product Description
- RBS 2202, Product Description
- RBS 2101, 2102, 2103 & 2202 Radio Configurations
- RBS 2202 Antenna Configurations
- ACCU Description
- BFU Description
- CDU-A Description
- CDU-C Description
- CDU-C+ Description
- CDU-D Description
- DXU Description
- DXU-21 Description
- ECU Description
- PSU -48 V Description
- PSU 230 V Description
- sTRU Single Transceiver Unit Description
- V3 Climate Unit Description
- Glossary
RBS 2202 Antenna Configurations
3.3 CDU-C+ Configurations without T MA
This section describes the GSM 900 configurations without TMA which are
possible using CDU-C+.
3.3.1 3x2 CDU-C+
P007698A
J
D
A
H
3
2
1
3
2
1
3
2
1
3
2
1
Cell
A
Cell
B
Cell
C
Figure 4 3x2 CDU-C+
Table 4 3x2 CDU-C+ with Duplexer
Cell CDU
Feeder label
Connector Signal
A
:DX1
H
1
T
X+RXA
A 1
A:RXB A2 RX B
B:DX1 H3 TX + RX AB 2
B:RXB D3 RX B
C:DX1 J2 TX + RX AC 3
C:RXB D2 RX B
From this 3x2 CDU-C+ configuration, the following configuration can be derived:
• 1x2 CDU-C+
9 (32)
EN/LZT 720 0342 Uen R1A