User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Product Safety Requirements RBS 2000
- 3 Environmental Capabilities
- 3.1 Scope
- 3.2 Terminology
- 3.3 References
- 3.4 Transport -40 C – +70 C
- 3.5 Storage -25 C – +55 C
- 3.6 Handling -40 C – +70 C
- 3.7 Operation Indoor +5 C – +40 C
- 3.8 Operation Outdoor -33 C – +40 C
- 3.9 Operation Outdoor -33 C – +45 C
- 3.10 Operation Outdoor -33 C – +55 C
- 3.11 Operation Mast-Mounted Equipment -33 C – +45 C
- 3.12 Operation Mast-Mounted Equipment -40 C – +55 C
- 4 Climate Protection
- 5 EMC Capabilities
- RBS 2101, Product Description
- RBS 2102, Product Description
- RBS 2103, Product Description
- RBS 2202, Product Description
- RBS 2101, 2102, 2103 & 2202 Radio Configurations
- RBS 2202 Antenna Configurations
- ACCU Description
- BFU Description
- CDU-A Description
- CDU-C Description
- CDU-C+ Description
- CDU-D Description
- DXU Description
- DXU-21 Description
- ECU Description
- PSU -48 V Description
- PSU 230 V Description
- sTRU Single Transceiver Unit Description
- V3 Climate Unit Description
- Glossary
RBS 2101, RBS 2102, RBS 2103 RBS 2202 Radio Configurations
DDTMA
ext DPX
DDTMA
RXDA
CDU-A
TRU
TRU
TX
RXA
RXB
TX
RXA
RXB
TX/RXA
TX/RXB
Ant.
RXDA
P004353B
ext DPX
X
X
Figure 30 A18_2.2 with External Duplexers and ddTMA
Allocation of New Radio Hardware
All SCCs, which are exclusively based on the configurations listed in Table
23 on page 72, support ddTMA and the appropriate support equipment.
The number of Bias-Ts, external duplexers and ddTMAs is a multiple of the
equipment needed for the SCC basic configurations, listed below.
71 (74)
EN/LZT 720 0341 Uen R1A