User Manual

RBS 2101, RBS 2102, RBS 2103 RBS 2202Radio Configurations
6.3 RBS 2103 Configurations
This section describes RBS 2103 configurations. For this RBS, only 900 MHz
configurations are available.
6.3.1 CDU-D Configurations
RBS 2103 configurations using CDU-D are shown in the table below.
Table 15 CDU-D Configurations
SCC Configuration No. of
Cabinets
TMA
No. of
Antennas
Allowed no.
of TRUs per
cabinet
1x6 D9de_2.6 1 no 2 0–6
1x12 D9de_2.12 2 no 2 1–6
6.3.2 CDU-A Configurations
RBS 2103 configurations using CDU-A are shown in the table below.
Table 16 CDU-A Configurations
TMA
No. of Antennas Allowed no. of
TRUs
Cell or sector: Cell or sector: Cell or sector:
SCC Configuration
1 2 3 1 2 3 1 2 3
3x2 3xA9d_2.2 no no no 2 2 2 0–2 0–2 0–2
Note: SCC 1x2 and 2x2 can be created with a subset of the 3x2 SCC.
These configurations are not presented since they are not regarded as
separate configurations from a system point of view.
64 (74)
EN/LZT 720 0341 Uen R1A