User Manual

RBS 2101, RBS 2102, RBS 2103 and RBS 2202 Hardware Reference Manual
2 Product Safety Requirements RBS 2000
The purpose of this document is to specify the product safety requirements for
the RBS 2000 series. For the latest revision of each standard, please refer to
52/1056-HRB 105 102/1. Other standards, not mentioned below, may also
be applicable for each RBS or subassembly, and are also used during the
verification and certification process.
2.1 References
Table 2 Standards and Other Reference Documents
Standard or Document Name
Title
1999/5/EC
R&TTE Directive
Directive 1999/5/EC of the European
Parliament and of the Council of
9 March 1999 on radio equipment
and telecommunications terminal
equipment and the mutual recognition
of their conformity
73/23/EEC
Low Voltage Directive (LVD)
Council Directive of 19 February 1973
on the harmonization of the laws of
Member States relating to Electrical
Equipment designed for use with
certain voltage limits
ANSI/UL 60950-1
CAN/CSA-C22.2 No. 60950-1-03
IEC 60950 Ed.3.0 (1999)
(1)
IEC 60950-1 Ed.1.0 (2001)
EN 60950-1:2001
Information technology equipment –
Safety – Part 1: General requirements.
CAN/CSA-C22.2 No. 94-M91
(R2001)
Special Purpose Enclosures
CAN/CSA-C22.2 No. 0.4-04 Bonding of Electrical Equipment
EN 60215
IEC 60215
Safety requirements for radio
transmitting equipment
EN 60825-1
IEC 60825-1
Safety of laser products – Part 1:
Equipment classification, requirements
and user’s guide
EN 50272-2 Safety requirements for secondary
batteries and battery installation.
Stationary batteries
EN 60529:1992 Specifications for degrees of protection
provided by enclosures (IP code)
5EN/LZT 720 0023 Uen R3B 2010-06-10