User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Product Safety Requirements RBS 2000
- 3 Environmental Capabilities
- 3.1 Scope
- 3.2 Terminology
- 3.3 References
- 3.4 Transport -40 C – +70 C
- 3.5 Storage -25 C – +55 C
- 3.6 Handling -40 C – +70 C
- 3.7 Operation Indoor +5 C – +40 C
- 3.8 Operation Outdoor -33 C – +40 C
- 3.9 Operation Outdoor -33 C – +45 C
- 3.10 Operation Outdoor -33 C – +55 C
- 3.11 Operation Mast-Mounted Equipment -33 C – +45 C
- 3.12 Operation Mast-Mounted Equipment -40 C – +55 C
- 4 Climate Protection
- 5 EMC Capabilities
- RBS 2101, Product Description
- RBS 2102, Product Description
- RBS 2103, Product Description
- RBS 2202, Product Description
- RBS 2101, 2102, 2103 & 2202 Radio Configurations
- RBS 2202 Antenna Configurations
- ACCU Description
- BFU Description
- CDU-A Description
- CDU-C Description
- CDU-C+ Description
- CDU-D Description
- DXU Description
- DXU-21 Description
- ECU Description
- PSU -48 V Description
- PSU 230 V Description
- sTRU Single Transceiver Unit Description
- V3 Climate Unit Description
- Glossary
RBS 2101, RBS 2102, RBS 2103 RBS 2202 Radio Configurations
6.2 RBS 2102, RBS 2202 Configurations
This section describes configurations for RBS 2102 and RBS 2202. All of the
configurations in this section are applicable to both RBSs, except for the GSM
900/GSM 1900 dual band configurations described in Section 6.2.8 on page 62.
The site equipment configurations for RBS 2102 and RBS 2202 consist of
the following:
• CDU-D configurations, see Section 6.2.1 on page 52
• CDU-A configurations, see Section 6.2.2 on page 53
• CDU-C Omni configurations, see Section 6.2.3 on page 54
• CDU-C 3–sector configurations, see Section 6.2.4 on page 55
• CDU-C+ configurations, see Section 6.2.5 on page 56
• Mixed CDU/basic configurations, see Section 6.2.6 on page 58
• GSM 900/GSM 1800 dual band configurations, see Section 6.2.7 on page
59
• GSM 900/GSM 1900 dual band configurations for RBS 2202 only, see
Section 6.2.8 on page 62
51 (74)
EN/LZT 720 0341 Uen R1A