User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Product Safety Requirements RBS 2000
- 3 Environmental Capabilities
- 3.1 Scope
- 3.2 Terminology
- 3.3 References
- 3.4 Transport -40 C – +70 C
- 3.5 Storage -25 C – +55 C
- 3.6 Handling -40 C – +70 C
- 3.7 Operation Indoor +5 C – +40 C
- 3.8 Operation Outdoor -33 C – +40 C
- 3.9 Operation Outdoor -33 C – +45 C
- 3.10 Operation Outdoor -33 C – +55 C
- 3.11 Operation Mast-Mounted Equipment -33 C – +45 C
- 3.12 Operation Mast-Mounted Equipment -40 C – +55 C
- 4 Climate Protection
- 5 EMC Capabilities
- RBS 2101, Product Description
- RBS 2102, Product Description
- RBS 2103, Product Description
- RBS 2202, Product Description
- RBS 2101, 2102, 2103 & 2202 Radio Configurations
- RBS 2202 Antenna Configurations
- ACCU Description
- BFU Description
- CDU-A Description
- CDU-C Description
- CDU-C+ Description
- CDU-D Description
- DXU Description
- DXU-21 Description
- ECU Description
- PSU -48 V Description
- PSU 230 V Description
- sTRU Single Transceiver Unit Description
- V3 Climate Unit Description
- Glossary
RBS 2101, RBS 2102, RBS 2103 RBS 2202 Radio Configurations
5.1.2 Basic Configurations A18d_2.2 and A19_2.2
The basic configurations A18d_2.2 and A19_2.2 are shown in the figure below.
ALNA/TMA
05_0453B
TRU
RXDA
CDU-A
TX/RXA
RXA
RXB
Antennas
TX
TRU
RXDA
RXA
RXB
TX
X
DPX
LNA
DPX
LNA
X
TX/RXB
Fi
gure 4 Basic Configurations A18_2.2 and A19_2.2
Characteristics A18_2.2 and A19_2.2
Number of CDUs 1
Number of ALNAs/TMAs 2
Fr
equency band
GS
M 1800 or GSM 1900
Max. number of TRUs 2
Number of feeders 4
Number of antennas 2
Antenna configuration TX/RX + TX/RX
9 (74)
EN/LZT 720 0341 Uen R1A