User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Product Safety Requirements RBS 2000
- 3 Environmental Capabilities
- 3.1 Scope
- 3.2 Terminology
- 3.3 References
- 3.4 Transport -40 C – +70 C
- 3.5 Storage -25 C – +55 C
- 3.6 Handling -40 C – +70 C
- 3.7 Operation Indoor +5 C – +40 C
- 3.8 Operation Outdoor -33 C – +40 C
- 3.9 Operation Outdoor -33 C – +45 C
- 3.10 Operation Outdoor -33 C – +55 C
- 3.11 Operation Mast-Mounted Equipment -33 C – +45 C
- 3.12 Operation Mast-Mounted Equipment -40 C – +55 C
- 4 Climate Protection
- 5 EMC Capabilities
- RBS 2101, Product Description
- RBS 2102, Product Description
- RBS 2103, Product Description
- RBS 2202, Product Description
- RBS 2101, 2102, 2103 & 2202 Radio Configurations
- RBS 2202 Antenna Configurations
- ACCU Description
- BFU Description
- CDU-A Description
- CDU-C Description
- CDU-C+ Description
- CDU-D Description
- DXU Description
- DXU-21 Description
- ECU Description
- PSU -48 V Description
- PSU 230 V Description
- sTRU Single Transceiver Unit Description
- V3 Climate Unit Description
- Glossary
RBS 2101, RBS 2102, RBS 2103 RBS 2202 Radio Configurations
• 2-sector site
Radio coverage in two sectors, that is two distinct
areas, using two BTSs.
• 3-sector site
Radio coverage in three sectors, that is three
distinct areas, using three BTSs.
3.1 Cabinet Types
RBS 2101
Outdoor cabinet with maximum 2 TRUs per cabinet
RBS 2102
Outdoor cabinet with maximum 6 TRUs per cabinet
RBS 2103
Outdoor cabinet with maximum 6TRUs per cabinet
RBS 2202
Indoor cabinet with maximum 6 TRUs per cabinet
3.2 Configurations Identity
The figure below shows how a basic configuration identity is constructed.
P004083A
C9de_3.6(1)\a
<n> : : = <Variant indication, lower case letter a-z>
<t> : : = <number of used transceivers>
<T>: : = <Max number of transceivers>
<A>: : = <Number of antennas>
<M> : : = <Modified frequency band>
d : : = duplexer in CDU and used
<F>: : = <Frequency band>
<X>: : = <CDU-type>
Figure 2 Basic Configuration Identity
5 (74)
EN/LZT 720 0341 Uen R1A