User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Product Safety Requirements RBS 2000
- 3 Environmental Capabilities
- 3.1 Scope
- 3.2 Terminology
- 3.3 References
- 3.4 Transport -40 C – +70 C
- 3.5 Storage -25 C – +55 C
- 3.6 Handling -40 C – +70 C
- 3.7 Operation Indoor +5 C – +40 C
- 3.8 Operation Outdoor -33 C – +40 C
- 3.9 Operation Outdoor -33 C – +45 C
- 3.10 Operation Outdoor -33 C – +55 C
- 3.11 Operation Mast-Mounted Equipment -33 C – +45 C
- 3.12 Operation Mast-Mounted Equipment -40 C – +55 C
- 4 Climate Protection
- 5 EMC Capabilities
- RBS 2101, Product Description
- RBS 2102, Product Description
- RBS 2103, Product Description
- RBS 2202, Product Description
- RBS 2101, 2102, 2103 & 2202 Radio Configurations
- RBS 2202 Antenna Configurations
- ACCU Description
- BFU Description
- CDU-A Description
- CDU-C Description
- CDU-C+ Description
- CDU-D Description
- DXU Description
- DXU-21 Description
- ECU Description
- PSU -48 V Description
- PSU 230 V Description
- sTRU Single Transceiver Unit Description
- V3 Climate Unit Description
- Glossary
RBS 2101, RBS 2102, RBS 2103 RBS 2202Radio Configurations
Contents
1 Introduction 3
2 References 3
3 Definitions 3
3.1 Cabinet Types 5
3.2 Configurations Identity 5
4 Frequency Bands 6
5 Basic Configurations 7
5.1 CDU-A Configurations 8
5.2 CDU-C Configurations 11
5.3 CDU-C+ Configurations 27
5.4 CDU-D Configurations 38
6 Site Equipment Configurations 49
6.1 RBS 2101 Configurations 49
6.2 RBS 2102, RBS 2202 Configurations 51
6.3 RBS 2103 Configurations 64
6.4 SW Power Boost Configurations 68
7 Basic Configurations with ddTMA 70
2 (74)
EN/LZT 720 0341 Uen R1A