User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Product Safety Requirements RBS 2000
- 3 Environmental Capabilities
- 3.1 Scope
- 3.2 Terminology
- 3.3 References
- 3.4 Transport -40 C – +70 C
- 3.5 Storage -25 C – +55 C
- 3.6 Handling -40 C – +70 C
- 3.7 Operation Indoor +5 C – +40 C
- 3.8 Operation Outdoor -33 C – +40 C
- 3.9 Operation Outdoor -33 C – +45 C
- 3.10 Operation Outdoor -33 C – +55 C
- 3.11 Operation Mast-Mounted Equipment -33 C – +45 C
- 3.12 Operation Mast-Mounted Equipment -40 C – +55 C
- 4 Climate Protection
- 5 EMC Capabilities
- RBS 2101, Product Description
- RBS 2102, Product Description
- RBS 2103, Product Description
- RBS 2202, Product Description
- RBS 2101, 2102, 2103 & 2202 Radio Configurations
- RBS 2202 Antenna Configurations
- ACCU Description
- BFU Description
- CDU-A Description
- CDU-C Description
- CDU-C+ Description
- CDU-D Description
- DXU Description
- DXU-21 Description
- ECU Description
- PSU -48 V Description
- PSU 230 V Description
- sTRU Single Transceiver Unit Description
- V3 Climate Unit Description
- Glossary
RBS 2202Macro Indoor RBS
5.1 Standard Hardware Units
P005819D
IDM
TRUs
CDUs
Base frame
PSUs
ECU
DXU
Cowl
(Optional)
Figure 5 Standard Hardware Units
CDU - Combining and Distribution Unit
The CDU is the interface between the transceivers and the antennas. Common
functions include TX combining, RX preamplifier and distribution, antenna
system supervision, and Tower Mounted Antenna (TMA) support.
Number of units: 1 – 3.
DXU - Distribution Switch Unit
The DXU is the central control unit for the RBS. Common functions include
distribution switching, BSC interface, timing, external alarm collection, local
bus control, and interface switching.
Number of units: (0) – 1.
12 (20)
E
N/LZT 720 0223 Uen R2A