User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Product Safety Requirements RBS 2000
- 3 Environmental Capabilities
- 3.1 Scope
- 3.2 Terminology
- 3.3 References
- 3.4 Transport -40 C – +70 C
- 3.5 Storage -25 C – +55 C
- 3.6 Handling -40 C – +70 C
- 3.7 Operation Indoor +5 C – +40 C
- 3.8 Operation Outdoor -33 C – +40 C
- 3.9 Operation Outdoor -33 C – +45 C
- 3.10 Operation Outdoor -33 C – +55 C
- 3.11 Operation Mast-Mounted Equipment -33 C – +45 C
- 3.12 Operation Mast-Mounted Equipment -40 C – +55 C
- 4 Climate Protection
- 5 EMC Capabilities
- RBS 2101, Product Description
- RBS 2102, Product Description
- RBS 2103, Product Description
- RBS 2202, Product Description
- RBS 2101, 2102, 2103 & 2202 Radio Configurations
- RBS 2202 Antenna Configurations
- ACCU Description
- BFU Description
- CDU-A Description
- CDU-C Description
- CDU-C+ Description
- CDU-D Description
- DXU Description
- DXU-21 Description
- ECU Description
- PSU -48 V Description
- PSU 230 V Description
- sTRU Single Transceiver Unit Description
- V3 Climate Unit Description
- Glossary
RBS 2202Macro Indoor RBS
• 230 – 240 V AC, 50 – 60 Hz
• -48 to -60 V DC
• +24 V DC
1.3 Optional Equipment
The RBS 2202 is available with the following optional equipment:
• Battery back-up
• Bias injector
• Control Module (CM)
• dual duplex TMA (ddTMA)
• DXX
• External Synchronisation Bus (ESB) cable for master – slave configuration
connection
• GPS
• Lifting eyes
• Mini DXC
• Overvoltage Protection (OVP)
• System voltage distribution module (DM)
• Tower Mounted Amplifier (TMA)
2 Dimensions
This section describes the physical characteristics of the RBS 2202; size and
weight, as well as colour.
4 (20)
E
N/LZT 720 0223 Uen R2A