User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Product Safety Requirements RBS 2000
- 3 Environmental Capabilities
- 3.1 Scope
- 3.2 Terminology
- 3.3 References
- 3.4 Transport -40 C – +70 C
- 3.5 Storage -25 C – +55 C
- 3.6 Handling -40 C – +70 C
- 3.7 Operation Indoor +5 C – +40 C
- 3.8 Operation Outdoor -33 C – +40 C
- 3.9 Operation Outdoor -33 C – +45 C
- 3.10 Operation Outdoor -33 C – +55 C
- 3.11 Operation Mast-Mounted Equipment -33 C – +45 C
- 3.12 Operation Mast-Mounted Equipment -40 C – +55 C
- 4 Climate Protection
- 5 EMC Capabilities
- RBS 2101, Product Description
- RBS 2102, Product Description
- RBS 2103, Product Description
- RBS 2202, Product Description
- RBS 2101, 2102, 2103 & 2202 Radio Configurations
- RBS 2202 Antenna Configurations
- ACCU Description
- BFU Description
- CDU-A Description
- CDU-C Description
- CDU-C+ Description
- CDU-D Description
- DXU Description
- DXU-21 Description
- ECU Description
- PSU -48 V Description
- PSU 230 V Description
- sTRU Single Transceiver Unit Description
- V3 Climate Unit Description
- Glossary
RBS 2103 Macro Outdoor
8 Transmission
The RBS 2103 is connected to a transmission interface G.703, type E1
(2 Mbits/s) or T1 (1.5 Mbits/s). For E1 interfaces, 75
coaxial or 120 twisted
pair cables are used. For T1 interfaces, 100
twisted pair cables are used.
9 External Alarms
The RBS 2103 can be connected to a maximum of 8 external alarms via the
EACU in the mounting base.
10 Standards, Type Approvals, and Dependability
In this section a brief overview over standards, type approval and
electromagnetic compatibility are stated.
10.1 Safety S ta ndards
In accordance to t he market requirements, the RBS 2103 complies with the
following product safety standards:
• 73/23/EEC Low voltage directive
• IP55accordingtoIEC529
• FCC Rules, part 68
• EN 60950 / IEC 60950
• EN 60215 / IEC 60215
• UL 1950
• CSA 22.2 No. 950–M89
• FCC rules, part 68
10.2 Other S tandard and Regulations
Marking
The product is marked with signs to show compliance with product safety
standards.
19 (20)
EN/LZT 720 0221 Uen R1A