User Manual
Table Of Contents
- toc
- 1 Introduction
- 2 Product Overview
- 3 Dimensions
- Weight
- Colour
- 4 Space Requirements
- Space above the RBS Cabinet
- Layout for RBS Cabinets
- Earthquake Requirements
- Footprint
- 5 Environment
- 6 Hardware Units
- 6.1 RBS 2206 Standard Hardware Units
- ACCU-01
- CDU
- CXU-10
- DCCU-01
- dTRU
- DXU-21
- FCU
- IDM-01
- PSU
- DC Filter-01
- 6.2 RBS 2206 V2 Standard Hardware Units
- ACCU-11
- CDU
- CXU-10
- DCCU-11
- DCCU-13
- dTRU
- DXU-23
- IDM-11
- PSU
- 6.3 Optional Hardware Units
- ASU-01
- Bias Injector
- BBS
- ddTMA
- DXX
- DF
- ESB
- HCU
- 19-inch Space for Optional Equipment
- OXU
- Splitter
- TMA-CM-01
- TMA-CM-02
- 7 Interfaces
- 8 Power System
- 9 Transmission
- Overvoltage Protection Modules
- Optional Transmission Equipment
- 10 External Alarms
- 11 Standards, Regulations and Dependability
RBS Product Description
3 Dimensions
This section describes the physical characteristics of the RBS.
For dimensions, see Figure 1.
Weight
Table 1 Weights
Unit Weight
RBS cabinet
(1)
230 kg (507 lbs)
Base frame 12 kg (26 lbs)
(1) Fully equipped including base frame.
Colour
Table 2 Colour
Colour
Reference Number
White NCS S 1002-R
4 Space Requirements
The following sections describe the required space and recommended floor
layout.
4
19/1551-LZA 701 0001 Uen PG1 | 2010-10-08