User Manual
Table Of Contents
- toc
- 1 Introduction
- 2 Product Overview
- 3 Dimensions
- Weight
- Colour
- 4 Space Requirements
- Space above the RBS Cabinet
- Layout for RBS Cabinets
- Earthquake Requirements
- Footprint
- 5 Environment
- 6 Hardware Units
- 6.1 RBS 2206 Standard Hardware Units
- ACCU-01
- CDU
- CXU-10
- DCCU-01
- dTRU
- DXU-21
- FCU
- IDM-01
- PSU
- DC Filter-01
- 6.2 RBS 2206 V2 Standard Hardware Units
- ACCU-11
- CDU
- CXU-10
- DCCU-11
- DCCU-13
- dTRU
- DXU-23
- IDM-11
- PSU
- 6.3 Optional Hardware Units
- ASU-01
- Bias Injector
- BBS
- ddTMA
- DXX
- DF
- ESB
- HCU
- 19-inch Space for Optional Equipment
- OXU
- Splitter
- TMA-CM-01
- TMA-CM-02
- 7 Interfaces
- 8 Power System
- 9 Transmission
- Overvoltage Protection Modules
- Optional Transmission Equipment
- 10 External Alarms
- 11 Standards, Regulations and Dependability
Standards, Regulations and Dependability
11 Standards, Regulations and Dependability
This section provides a brief overview of standards, type approval, and EMC.
11.1 Safety Standards
In accordance with the market requirements, the RBS complies with the
following product safety standards:
• 73/23/EEC Low voltage directive
• IP 20 according to IEC/EN 60529
• FCC rules, part 68
• EN 60950-1 and IEC 60950-1
• EN 60215 and IEC 60215
• ANSI/UL 60950-1 and CSA C22.2 No. 60950-1
The RBS 2206 complies with following standards:
Note: Not applicable for the RBS 2206 V2
• EN 60825-1 and IEC 60825-1
• 21CFR 1040.10
11.2 Other Standards and Regulations
Marking
The product is marked with symbols to indicate compliance with product safety
standards.
Type Approval Standards
The RBS complies with the European Community and the North America
market requirements regarding radio performance. The product has the CE
and FCC symbols to indicate compliance with the legal requirements of the
respective region.
31
19/1551-LZA 701 0001 Uen PG1 | 2010-10-08