User Manual
Table Of Contents
- toc
- 1 Introduction
- 2 Product Overview
- 3 Dimensions
- Size and Weight
- Surface and Colour
- 4 Space Requirements
- Footprint
- 5 Environment
- 6 Hardware Units
- 7 Interfaces
- 7.1 External Connections
- Connections on DF
- Overvoltage Protection Modules in the RBS 2106i and RBS 2106 V3
- Overvoltage Arrestors for External Alarms in the RBS 2106
- Antenna Connections
- Other External Connections
- External Connections to TM
- Transport Network to TM
- 7.2 Test Interface
- 7.3 Operator Interface
- Indicators
- Buttons
- 8 Power System
- 8.1 Power Supply
- AC Mains Supply Voltage
- External Earth Fault Circuit Breakers
- Mains Fuses
- 8.2 Battery Backup
- Internal Battery Backup
- External Battery Backup
- 8.3 Output Power to TM
- 8.4 Power Consumption
- 9 Transmission
- Optional Transmission Equipment
- 10 External Alarms
- 11 Standards, Regulations and Dependability
PRELIMINARY
Interfaces
P017212C
CDU-K
TMA-CM
connection plate
CF cover
Figure 17 RBS 2106i and RBS 2106 V3 Antenna Connections with CDU-K
Other External Connections
Table 26 External Connections
Connection
Location
Connection To Type Connector
AC connection box AC Mains connections Screw terminal for wires
4 – 16 mm
ACCU AC Service outlet • IEC 83:1975 standard C
2b (Sweden, Germany
and others)
• IEC 83:1975 standard B2,
same as BS 1363:1984
standard 13A (UK)
• IEC 83:1975 standard
A5-15 (USA)
Reference earth Earthing connection M8 screw, 50 mm
2
stranded
copper wire
External Connections to TM
Optical fibre and Mini-Link radio cables are connected to the TM through
connection field 3. Twisted pair cables connect to the TM through the OVP.
37
129/1551-LZA 701 0001 Uen PF1 | 2010-10-08