User Manual
Table Of Contents
- toc
- 1 Introduction
- 2 Product Overview
- 3 Dimensions
- Size and Weight
- Surface and Colour
- 4 Space Requirements
- Footprint
- 5 Environment
- 6 Hardware Units
- 7 Interfaces
- 7.1 External Connections
- Connections on DF
- Overvoltage Protection Modules in the RBS 2106i and RBS 2106 V3
- Overvoltage Arrestors for External Alarms in the RBS 2106
- Antenna Connections
- Other External Connections
- External Connections to TM
- Transport Network to TM
- 7.2 Test Interface
- 7.3 Operator Interface
- Indicators
- Buttons
- 8 Power System
- 8.1 Power Supply
- AC Mains Supply Voltage
- External Earth Fault Circuit Breakers
- Mains Fuses
- 8.2 Battery Backup
- Internal Battery Backup
- External Battery Backup
- 8.3 Output Power to TM
- 8.4 Power Consumption
- 9 Transmission
- Optional Transmission Equipment
- 10 External Alarms
- 11 Standards, Regulations and Dependability
PRELIMINARY
RBS Product Description
The DF in the RBS 2106i and RBS 2106 V3 can be equipped with the following:
• Up to two OVP modules for PCM (four PCM lines)
• Up to two OVP modules for ESB (one incoming and one outgoing)
• Up to four OVP modules for external alarms (16 external alarms)
Overvoltage Arrestors for External Alarms in the RBS 2106
All voltage arrestors, for example external alarms, have space for two alarms.
The cable used must be single core, with a diametre of 0.3 – 0.8 mm.
Table 24 Overvoltage Arrestors
Alarm
Connector
Alarm 1+ OVP 1, terminal 4
Alarm 1- OVP 1, terminal 3
Alarm 2+ OVP 1, terminal 2
Alarm 2- OVP 1, terminal 1
Alarm 3+ OVP 2, terminal 4
Alarm 3- OVP 2, terminal 3
Alarm 4+ OVP 2, terminal 2
Alarm 4- OVP 2, terminal 1
Alarm 5+ OVP 3, terminal 4
Alarm 5- OVP 3, terminal 3
Alarm 6+ OVP 3, terminal 2
Alarm 6- OVP 3, terminal 1
Alarm 7+ OVP 4, terminal 4
Alarm 7- OVP 4, terminal 3
Alarm 8+ OVP 4, terminal 2
Alarm 8- OVP 4, terminal 1
Antenna Connections
The antenna connectors are accessible from the antenna connection box in
the bottom of the cabinet. The intake plate in the bottom of the cabinet is
equipped with six antenna cable connectors. These connections are shown in
the figures and table below.
34
129/1551-LZA 701 0001 Uen PF1 | 2010-10-08