Specifications

12
- , (comma)
- code generated by activation (ground connecting) of the sixth
communicator input (2 HEX digits)
- , (comma)
- code generated by deactivation of the sixth communicator input (2 HEX
digits)
- , (comma)
- code generated by GSM signal weakening (2 HEX digits)
- , (comma)
- code generated by the periodical test (2 HEX digits)
- , (comma)
- duration (in hours) the periodical test is performed at (2 decimal digits)
- . (period)
Note:
All fields previously defined will be filled in, but the phone numbers
(eventually). If the first phone number (of the GSM monitoring station) is present in
the configuration SMS, the communicator will transmit certain events to the
monitoring station. If the second phone number is programmed, the communicator
will transmit SMS messages to this second phone number.
A typical example of a configuration SMS message:
0744111111,0744212223,123A,FB,EB,00,01,02,03,04,05,06,07,08,09,0B,0C,0D,90
,10.
By this SMS, the GSM communicator is programmed to transmit its own and the
burglary control panel generated event codes to the monitoring station with the
phone number 0744111111. SMS messages associated to events will be
transmitted onto the mobile phone number 0744212223.
Codes generated by the burglary control panel will keep the client’s account number
settled in the control panel. Events generated by the communicator will have the
account number 123A.
Upon phone line loss and phone line restoring, respectively, the communicator will
generate codes FB and EB, having the account number 123A.
Upon activation, deactivation of the 6 inputs of the communicator, codes 00, 02, 04,
06, 08, 0B, and 01, 03, 05, 07, 09 and 0C, with account number 123A, will be
generated.
Upon GSM signal weakening, the interface will transmit code 0D settled in the
configuration SMS to the monitoring station.
The interface transmits code 90 for the periodical test. The duration for the
periodical test performing is 10 hours.
Note:
Changing codes associated to events in the configuration SMS, will trigger
the appropriate interpretation of events associated to these codes. For example, if
the 6th parameter is programmed 38 instead of 00, then, upon activation of the first
communicator input, an „Alarm on zone 8” SMS type will be transmitted (instead of
TRIG1 ON), while the monitoring station will consider the event of the same type.