User's Manual Part 1

18 Using the Phone’s Extras Menu
To select a device
1. Scroll to Extras,
YES, Accessories, YES, HBH, YES, Paired
Devices,
YES, Select Device, YES.
2. Scroll to the device you want the Headset to communicate with
and press
YES.
You can add devices to the list of paired devices. When you choose
to add a device, Bluetooth pairing is enabled in the Headset. If the
device is accepted, it is added to the list. The new device becomes
the selected device.
To add a device
• You add a device by pairing it with the Headset. See “Pairing the
Headset” on page 11.
To delete a device
1. Scroll to Extras,
YES, Accessories, YES, HBH, YES,
Paired Devices,
YES, Delete Device, YES.
2. Scroll to the device you want to delete and press YES.
The next device in the list becomes the selected device.
Adjusting the Volume
Listening Volume
You can adjust the volume in the Headset earpiece via either the
Headset volume buttons or by using the phone.
To change the listening volume using the phone
1. During an ongoing call, scroll to Extras,
YES, Accessories, YES,
HBH,
YES, Settings, YES, Listening Volume, YES.
2. Use to increase the volume, or to decrease the volume.
3. Press YES to save the settings.
Ring Volume
The Headset always starts to ring at low volume. The volume then
increases in steps to the volume level you have set in this menu.
To set the ring volume
1. Scroll to Extras,
YES, Accessories, YES, HBH, YES, Settings,
YES, Ring Volume, YES.
2. Use to increase the volume, or to decrease the volume.
3. Press YES to save the settings.
HBH10-R3A-PRINT.BOOK Page 18 Tuesday, October 3, 2000 2:26 PM