User manual

AVAILABLE OPTIONS
CONTROL PANELS
The Control Panel plugs into the Front Cap Assembly and
determines the number of channels (2 without scan, 16 or 128
with scan), the Type 99 decode option, or the Public Address
option.
The panel is made of highly durable plastic with rounded
corners and recessed controls for passenger safety require-
ments.
There are 7 different optional interchangeable control pan-
els available:
• Option CP01 2 Channel (19B801450P1)
• Option CP02 2 Channel
• with Type 99 decode (19B801450P2)
• Option CP03 16 Channel
• with scan (19B801450P3)
• Option CP04 16 Channel
• with scan and Public Address (19B801450P4)
• Option CP05 128 Channel
• with scan (19B801450P5)
• Option CP06 2 Channel
• with Public Address (19B801450P6)
• Option CP07 16 Channel
• with scan and Type 99 decode (19B801450P7)
The Public Address Control Panels include a relay
(19C851585P6) for automatic switching of the public address
audio to an external speaker. The 128 channel Control Panel
includes a larger memory EEPROM to replace U704 on the
Logic Board. Refer to the Installation Manual.
PC PROGRAMMING OPTIONS
The radio is programmed using an IBM compatible per-
sonal computer equipped with a RS-232 connector. Option
TQ3310 provides the RS-232 serial interface unit and the cable
between the PC and the unit. (An auxiliary power supply for
the unit is also included which is not needed to program the
MVS.) Option TQ3315 provides the MVS programming cable
between the PC interface unit and the MVS microphone jack.
Option TQ3318 provides the MVS programming software to
run on the PC.
NOISE SUPPRESSION KIT OPTION
Noise Suppression Kit Option PD01 (19A148539G1) is
available for installations where excessive alternator or electri-
cal noises present on the power cable do not permit the radio to
operate properly. Refer to the interconnect diagram.
AC POWER SUPPLY OPTIONS
To use the radio as a base station, Option PS01
(19A704647P2) 121 Volt AC, 60 Hertz, 13A power supply is
available. The standard nine foot power cable supplied with the
radio is connected to the mating connector on the power sup-
ply. In addition, Option PS02 (19A704647P3) 120/240 Volt
AC, 50/60 Hz, 13A supply is also available where its use is
dictated. DC remote control may be provided with either sup-
ply.
OPTION CABLE
Option Cable Option CC01 (19C851585P3) is used to
bring all option connections from the System Board through
the back of the radio to the outside. This cable is required with
all external options.
UNIVERSAL TONE CABLE
Universal Tone Cable Option CC02 (19C851585P5)
equipped with a 9-pin Winchester connector is required when
an external tone encoder or decoder is used. The tone cable in-
terconnects the tone encoder/decoder with the radio through
the option cable Option CC01. Refer to the installation dia-
grams in this manual for jumper modifications. A second "Y"
cable is required when both encode and decode functions are
used (Option CC04).
POWER CABLE
20 foot power cable Option CC03 (19B801358P4) is avail-
able for installations requiring more than the standard 9 foot
cable.
EXTERNAL SPEAKER OPTIONS
The external speaker options provide a five inch speaker in
a LEXAN housing. Option LS0I (19C850550G10) provides a
dash mount and Option LS02 (19C850550G11) provides a
window mount. The radio’s 3 watt amplifier drives the
speaker’s 3.2 ohm impedance. The speaker leads are connected
to pins 2 and 9 of option cable Option CC01. When the Exter-
nal Speaker is used, refer to the Installation Instructions and
Interconnection diagram for jumper modifications.
TABLE 1
TONE & DIGITAL CHANNEL GUARD
TONE CG DIG. CG DIG. CG DIG. CG
No. CG
67.0
71.9
74.4
77.0
79.7
82.5
85.4
88.5
91.5
94.8
97.4
100.0
103.5
107.2
110.9
114.8
118.8
123.0
127.3
131.8
136.5
141.3
146.2
151.4
156.7
162.2
167.9
173.8
179.9
186.2
192.8
203.5
210.7
023
025
026
031
032
043
047
051
054
065
071
072
073
074
114
115
116
125
131
132
134
143
152
155
156
162
165
172
174
205
223
226
243
244
245
251
261
263
265
271
306
311
315
331
343
346
351
364
365
371
411
412
413
423
431
432
445
464
465
466
503
506
516
532
546
565
606
612
624
627
631
632
654
662
664
703
712
723
731
732
734
743
754
036*
053*
122*
145*
212*
225*
246*
252*
255*
266*
274*
325*
332*
356*
446*
452*
454*
455*
462*
523*
526*
*Codes Unique to Ericsson GE
To reverse the polarity of the digital Channel Guard codes, type I ("inverted") before the code number, i.e. I023.
NOTE
LBI-31932
4