User's Manual

Ericsson Internal
INSTALLATION INSTR. 13 ( 37 )
/ XKUEMHU 50/1531-LZA 701 0001 Uen
CBC/ XRX ( Jan-Erik Thillberg) 2009-03-09 C
Prepared (also subject responsible if other) No.
Approved Checked Date Rev Reference
9.
Tighten the two M10 nuts on the
lower support to a torque of 41 Nm,
using a torque wrench fitted with a
16 mm socket.
41 Nm
10.
On each clamp bolt of the lower
mounting fixture, tighten the inner
M10 nuts to a torque of 41 Nm,
using a torque wrench fitted with
16 mm open end head.
41 Nm
K000212A