User's Manual
Table Of Contents
- toc
- RBS Product Description
- 1 Introduction
- 2 Product Overview
- 3 Dimensions
- 4 Space Requirements for MU
- 5 Space Requirements for RRU-N
- 6 Environment
- 7 Hardware Units RBS 2111 Second Generation
- 8 MU Connection Interfaces
- 9 RRU-N Connection Interfaces
- 10 Power System
- 11 Transmission
- 12 External Alarms
- 13 Standards, Regulations and Dependability
- RBS Product Description
- tables
- Table 1 The MU Dimensions
- Table 2 The MU Weight
- Table 3 The MU Colour
- Table 4 The RRU-N Dimensions
- Table 5 The RRU-N Weight
- Table 6 The RRU-N Colour
- Table 7 Times for Cold Startup and Restart
- Table 8 Normal Conditions During Outdoor Operation
- Table 9 Mechanical Conditions During Outdoor Operation
- Table 10 Heat Dissipation
- Table 11 Compliance Boundary Dimensions for General Public (GP)
- Table 12 Characteristics for the Typical Antenna
- Table 13 Total Power to the Antenna for Typical RBS Configuratio
- Table 14 Hardware Units
- Table 15 Standard Hardware Units
- Table 16 MU Connection Interfaces
- Table 17 RRU-N Connection Interfaces
- Table 18 Antenna Connection
- Table 19 DC Supply Voltage Requirements for MU and RRU-N
- Table 20 Fuse Recommendation for MU and RRU-N
- Table 21 Power Consumption
Ericsson Internal
DESCRIPTION 5 ( 46 )
/ XSNSIXI 198/1551-LZA 701 0001 Uen
CBC/XRX/M (Kai Lian) 2011-05-05 C
Prepared (also subject responsible if other) No.
Approved Checked Date Rev Reference
2.3 Optional Equipment
The following equipment is optional and can be ordered separately. It is not
necessary for basic RBS functions.
The optional equipment described in this section is situated outside the RBS.
2.3.1 Optional Equipment for MU
At least one of the optional equipment should be ordered separately. It is
necessary for MU installation.
The following mounting equipment alternatives exist:
Wall-Mounting Equipment for MU
Equipment for mounting the MU on a wall.
Pole-Mounting Equipment for MU
Equipment for mounting the MU on a pole or a mast.
19 inch Rack-Mounting Equipment for MU
Equipment for mounting the MU in a 19 inch rack.
2.3.2 Optional Equipment for RRU-N
At least one of the optional equipment should be ordered separately. It is
necessary for RRU-N installation.
The following mounting equipment alternatives exist:
Wall-Mounting Equipment for RRU-N
Equipment for mounting the RRU-N on a wall.
Pole-Mounting Equipment for RRU-N
Equipment for mounting the RRU-N on a pole or a mast.
2.3.3 Optional Equipment
External Splitter
The external splitter can be connected to one antenna port of the RRU-N to
support highway configuration.
PSU-AC Kits
The RBS 2111 Second Generation can be equipped with PSU-AC kits to
adopt AC power.