User's Manual
Table Of Contents
- toc
- RBS Product Description
- 1 Introduction
- 2 Product Overview
- 3 Dimensions
- 4 Space Requirements for MU
- 5 Space Requirements for RRU-N
- 6 Environment
- 7 Hardware Units RBS 2111 Second Generation
- 8 MU Connection Interfaces
- 9 RRU-N Connection Interfaces
- 10 Power System
- 11 Transmission
- 12 External Alarms
- 13 Standards, Regulations and Dependability
- RBS Product Description
- tables
- Table 1 The MU Dimensions
- Table 2 The MU Weight
- Table 3 The MU Colour
- Table 4 The RRU-N Dimensions
- Table 5 The RRU-N Weight
- Table 6 The RRU-N Colour
- Table 7 Times for Cold Startup and Restart
- Table 8 Normal Conditions During Outdoor Operation
- Table 9 Mechanical Conditions During Outdoor Operation
- Table 10 Heat Dissipation
- Table 11 Compliance Boundary Dimensions for General Public (GP)
- Table 12 Characteristics for the Typical Antenna
- Table 13 Total Power to the Antenna for Typical RBS Configuratio
- Table 14 Hardware Units
- Table 15 Standard Hardware Units
- Table 16 MU Connection Interfaces
- Table 17 RRU-N Connection Interfaces
- Table 18 Antenna Connection
- Table 19 DC Supply Voltage Requirements for MU and RRU-N
- Table 20 Fuse Recommendation for MU and RRU-N
- Table 21 Power Consumption
Ericsson Internal
DESCRIPTION 44 ( 46 )
/ XSNSIXI 198/1551-LZA 701 0001 Uen
CBC/XRX/M (Kai Lian) 2011-05-05 C
Prepared (also subject responsible if other) No.
Approved Checked Date Rev Reference
13 Standards, Regulations and Dependability
In this chapter a brief overview of standards, type approval and electromagnetic
compatibility are stated.
13.1 Safety Standards
In accordance with market requirements, the RBS configured for 1800 MHz or
900 MHz complies with the following product safety standards and directives:
• EN 60 950-1 / IEC 60 950-1
• EN 60 950-22 / IEC 60 950-22
• EN 60 215 / IEC 60 215
In accordance with market requirements, the RBS configured for 1900 or 850
MHz comply with the following product safety standards:
• ANSI/UL 60 950-1 / CSA C22.2 No. 60 950-1
13.2 Other Standards and Regulations
All Ericsson devices are designed to be compliant with rules and regulations
in locations they are sold and will be labelled as required. Any changes or
modifications to Ericsson equipment, not expressly approved by Ericsson,
could void the user’s authority to operate the equipment.
Marking
The product is marked with symbols to indicate compliance with product safety
standards.
Product Approval Standards
The RBS configured for 1800 MHz or 900 MHz complies with the EC (European
Community) market requirements regarding radio performance, as well as the
R-TTE directive 2004/108/EC. The product is marked with the CE symbol to
indicate compliance with the legal requirements.
The RBS configured for 1900 MHz or 850 MHz complies with the NOA (North
America) market requirements regarding radio performance. The product is
marked with the FCC symbol to indicate compliance with the legal requirements.
EMC
The RBS configured for 1800 MHz or 900 MHz complies with the EC (European
Community) market requirements regarding Electromagnetic Compatibility
(EMC), as well as the R-TTE directive 2004/108/EC. The product is marked
with the CE symbol to indicate compliance with the legal requirements.