User's Manual

Ericsson Internal
INSTRUCTIONS 11 ( 14 )
/ XSNBRKI 4/1532-LZA 701 0001 Uen
EAB/ FJG/RSP ( Louise Cederlund) 2008-05-14 G
Prepared (also subject responsible if other) No.
Approved Checked Date Rev Reference
Table 5 RBS Check with AC Power Off
Check That:
Yes
The Battery Mode indicator on the BFU shows a constant yellow light
The RBS is still running
2. Turn on the incoming AC power to the RBS.
Table 6 RBS Check with AC Power On
Check That:
Yes
The Battery Mode indicator on the BFU is off
The RBS is still running
8 Performing Concluding Routines
This section describes what to do before leaving the site and provides a site
checklist. It also contains a test record and instructions for filling in a trouble
report and a so-called blue tag repair delivery note, if necessary.
8.1 Saving the IDB
If it is necessary to reinstall the IDB, then the IDB parameters must be saved on
the PC. See document
OMT User’s Manual.
1. On the Configuration menu, click Save IDB.
2. Give the IDB file an RBS-specific name and save the file on the PC.
8.2 Completing the Test Record
This section contains a test record. Ericsson recommends filling in the test
record during the test procedure.