User's Manual
Table Of Contents
- toc
- 1 Introduction
- 2 Tools and Documentation
- 3 Installation RRU-N
- Introduction
- Target Group
- 3.1 Preconditions
- 3.2 Installation Procedure
- Figure 1 Workflow for Installing the RRU-N
- 3.2.1 Unpacking and Checking the Material
- 3.2.2 Installing RRU-N on a Pole or a Mast
- 3.2.3 Installing RRU-N on a Wall
- 3.2.4 Grounding RRU-N
- 3.2.5 Connecting the 48 V DC Power
- 3.2.6 Connecting Optical Fiber Cable and Setting RRU-N Configura
- 3.2.7 Connecting Antenna Cables
- 3.2.8 Installing the Front Sunshield
- 4 Optional Installation External Splitter/Highway Function
- 5 Optional Installation External Hybrid Combining Unit (EHCU)
- 6 Performing Concluding Routines
- 7 Verifying the Installation
- tables
Installation RRU-N
9.
Tighten the two M10 nuts on
the lower support to a torque of
41 Nm, using a torque wrench
fitted with a 16 mm socket.
41 Nm
10.
On each clamp bolt of the lower
mounting fixture, tighten the
inner M10 nuts to a torque of
41 Nm, using a torque wrench
fitted with 16 mm open end head.
41 Nm
K000212A
950/1531-LZA 701 0001 Uen PA4 2008-07-31