User's Manual
Table Of Contents
- toc
- 1 Introduction
- 2 Tools and Documentation
- 3 Installation RRU-N
- Introduction
- Target Group
- 3.1 Preconditions
- 3.2 Installation Procedure
- Figure 1 Workflow for Installing the RRU-N
- 3.2.1 Unpacking and Checking the Material
- 3.2.2 Installing RRU-N on a Pole or a Mast
- 3.2.3 Installing RRU-N on a Wall
- 3.2.4 Grounding RRU-N
- 3.2.5 Connecting the 48 V DC Power
- 3.2.6 Connecting Optical Fiber Cable and Setting RRU-N Configura
- 3.2.7 Connecting Antenna Cables
- 3.2.8 Installing the Front Sunshield
- 4 Optional Installation External Splitter/Highway Function
- 5 Optional Installation External Hybrid Combining Unit (EHCU)
- 6 Performing Concluding Routines
- 7 Verifying the Installation
- tables
RBS Installation Instructions
7.
Hook the RRU-N onto the stud
bolts of the upper mounting
fixture. Mount the washers
and nuts on the stud bolts, and
tighten them fingertight.
8.
Loosen the clamp on the lower
mounting fixture and lift the
mounting fixture to the lower
support of the RRU-N.
Mount the washers and nuts on
the stud bolts, and tighten them
fingertight.
Tighten the clamp on the lower
mounting fixture fingertight.
8 50/1531-LZA 701 0001 Uen PA4 2008-07-31