ERITECH SYSTEM 1000 ® Instruction Manual E618IS13WWEN.
ERITECH SYSTEM 1000 - Instruction Manual ® Installation Guidelines This manual is a guide to the Installation, Operation and Maintenance of the ERITECH SYSTEM 1000 Lightning Protection System. It assumes that the system to be installed has been designed by an authorized ERICO representative. The system design will include: • rounding systems design – a configuration should be G designed as a result of soil resistivity analysis.
ERITECH SYSTEM 1000 - Instruction Manual ® Typical MAST Installation Arrangement For Cantilevered Mast SI25i, SI40i, SI60i SI25i, SI40i, SI60i or or Downconductor tightly compressed against mast CABTIESS are installed 3 per meter to strap the downconductor to the remaining length of lower mast.
ERITECH SYSTEM 1000 - Instruction Manual ® Typical MAST Installation Arrangement For Standing Mast SI25i, SI40i, SI60i Mast or or Do not over-tension Guy Wires (slightly sagging) Guy Kit* Downconductor tightly compressed against mast Anchor Points not supplied with GUYKIT CABTIESS Support Base CABTIESS are installed 3 per meter to strap the downconductor to the remaining length of lower mast.
